50 ft Aquaculture Cat


  • Length: 50 ft (15 meters)
  • Beam: 23 ft (7 meters)
  • Draft: Shallow draft
  • Moulded depth: According to Project
  • Engine model: To be chosen by the owner
  • Main engine power: 2 x 650/700 HP
  • Auxiliary engine power: 90/100 HP
  • Crane: 1212 lb (550 kg) at 37.7 ft (11.5 meters)
  • Electronic equipment: To be chosen by the owner

Practical and efficient catamaran for aquaculture works, with a large deck surface and a large deadweight capacity.

Download the main particulars

Custom building of the mould with our CNC machine.

Our machine and our qualified personnel are the specialists in 3D and CNC technology to guarantee the best results and expand our possibilities to infinity.

The hull, as well as the deck, are constructed using a vacuum infusion process, a technique that optimizes the fiber to resin ratio. The result is a piece that is very strong and exceptionally light.


This vessel is powered by 2 engines of between 650 and 700 HP, engine make and model to be decided by the owner.
One auxiliary engine will be also provided, with a power output of between 90 and 100 HP.
Installation and assembly will be carried out in our shipyard.


A remote-controlled marine crane will be installed. The capacity of this crane is 1212 lb (550 kg) at 37.7 ft (11.5 meter) reach.


We will supply and install the electronic equipment requested by the owner (radar, depth sounder, GPS, VHF, etc).


Depth sounder